The Wright Rocket Site
The Wright Rocket Site
|
|
Ultimate Endeavor Project - Page 2 Since the motor mount is all built before insertion into the airframe I needed to drill holes to later inject epoxy in to secure the internal fin connections.
No going back now - gluing in the motor mount and letting it set up.
Now I wanted to get some epoxy in on the sides of the middle and bottom centering rings. To do this I used the holes I will later use to put epoxy on the fin roots so I needed to tape off some holes.....
...get safe with the epoxy....
...and inject away!
And now on to the fins.
All in all a great weekend of construction! Stay tuned! |
